royale_touche_logo_white

Royale Touche

 

1 & 1.25 mm

QUALITY YOU CAN SWEAR BY

Royale Touche Luxury Laminates go through some of the most stringent quality tests in the industry. Before a Royale Touche product becomes a part of your home or office space it goes through thorough tests for heat resistance, crack-resistance, stain-resistance and scratch test all at an ISI certified laboratory equipped with specialised Q&A machines from Germany and the USA.

As far as Royale Touche products are concerned, ‘ tested ok’ would be an understatement. We test a product until we know for sure that it’s more than just ok. It has to be great. It has to last. Quality is what we built our company upon. And it’s what every Royale product is made of.

Properties Specified values as per IS: 2046 – 1995, Type S, HGS
Thickness 1.00mm (±0.10mm)
Dimensional stability at deviated temperature
- Longitudinal (%)
- Transverse (%)
0.55 (Maximum)
1.025 (Maximum)
Dimensional stability at 20˚C
- Longitudinal (%)
- Transverse (%)
0.375 (Maximum)
0.60 (Maximum)
Resistance to dry heat 180˚C Not worse than Grade 4
Resistance to immersion in boiling water
- Mass increase (%)
- Thickness increase (%)
- Appearance
10.0 (Maximum)
11.8 (Maximum)
Not worse than Grade 4
Resistance to impact by small diameter ball 20 N (Minimum)
Resistance to cracking Not worse than Grade 4
Resistance to scratching 2 N (Minimum)
Resistance to staining Not worse than Grade 5
Resistance to cigarette burns Not worse than Grade 3
Resistance to steam Not worse than Grade 4
Resistance to colour change (wool standards)
- In Xenon arc light
- In enclosed Carbon arc light
Not worse than Grade 6
Not worse than Grade 5
Resistance to surface wear 350 (revolution)
Appearance Should be free from foreign particles