PB 4002 IS A WATER BASED DISPERSION/EMULTION OF ACRYLIC & STYRENE CO-POLYMER. IT IS A SURFACTANT STABILIZED COLLOID FREE EMULSION. IT GIVES HARD, TOUGH, FLEXIBLE & GLOSSY FILM, GOOD WET SCRUB & ABRASION, EXCELLENT PIGMENT LOADING CHARACTERISTICS.
PHYSICAL PROPERTIES
Appearance:
BLUISH TRANSLUCENT
EMULSION
SOLID CONTANT AT 105 OC. FOR 90 MINUTES :
55±1%
VISCOSITY @ 30OC BY BROOKFIELD DVE SPL.S61,10 RPM :
50 TO 80
PH:
8 to 10
CHEMICAL COMPOSITION
- STYRENE ACRYLIC CO-POLYMER EMULSION
FILM CHARACTERISTICS
- HARD, TOUGH, CLEAR, FLEXIBLE & ABRASION EXCELLENT & WET SCRUB & ABRASION. EXCELLENT PIGMENT LOADING CHARACTERISTICS, ALKALI RESISTANCE.
APPLICATIONS
- ROYAL BOND PB 4002 BEING HARD & TOUGH BREATHABLE POLYMER WITH VERY GOOD EXTERIOR DURABILITY, IT IS WELL SUITED FOR EXTERIOR TEXTURE PAINT. IT HAS VERY GOOD BINDING CAPACITY TO HOLD TEXTURE AGGRE GATES. IT HAS SPECIAL SURFACTANT SYSTEM AND ITS CAPABILITY TO FROM TIGHT FILM ENABLES IT TO RESIST SUBSTRATE EFFLORESCENCE EFFECTIVELY. FILMS BASED ON ROYAL BOND PB 4002 DO NOT HOLD ON TO DIRT AND HENCE KEEPS FILM CLEAN. IT IS HIGHLY WATER RESISTANT, COMBINED WITH EXCELLENT UV RESISTANCE THAT GIVES IT GOOD EXTERIOR WEATHER –ABILITY PROPERTIES. GENERAL PURPOSE BINDER FOR WASHABLE DISTEMPER / INTERIOR PAINT / CEMENT PRIMERS & PUTTY. IT CAN BE USED FOR ECONOMICAL EXTERIOR PAINT & TEXTURE COATINGS.
HANDLING & STORAGE
- STORE IN SEALED CONTAINERS IN DRY CONDITION AT ROOM TEM. AWAY FROM DIRECT HEAT, SUNLIGHT, DUST & MOISTURE. PROTECT FROM FROST. CONTAINER ONCE OPENED SHOULD BE SHUT TIGHTLY TO PREVENT CONTAMINATION. STOCK SHOULD BE USED ON A FRIST IN, FRIST OUT BASIS.
