ROYAL BOND PU 1

ROYAL BOND PU 1 is a Polyurethane rubber based solvent containing premium quality adhesive.

APPLICATION AREA

  • Surface to be bonded should be clean, dry and free from oil/grease stains.
  • Stir the adhesive before application.
  • Apply ROYAL BOND PU 1 on both the surfaces. Add 5 % hardener for better results.
  • Once the adhesive becomes dry, heat both the surfaces, press finally together.
  • Final bond is achieved in 24hrs.

TYPICAL PHYSICAL PROPERTIES

AppearanceWater white transparent liquid
Viscosity at 30 °C, by brookfield viscometer rvt/spindle #3/20 rpm08 -12 Poise
Specific Gravity 0.820 – 0.860 gm/ml
Flash point 00c to 40c
Drying time15-35 secs approx.(varies as per climatic conditions)
Packaging200 ltr, 26 ltr,5 ltr, 1ltr, 500ml, 200 ml, 100 ml

Special Features

  • Free from Benzene- Non-hazardous to health.
  • Multiple usages.
  • Excellent spreadability.
  • High coverage specially on flooring – 90 sq ft per liter depending upon the floor conditions.
  • Mild smell.
  • Economical in long run.

SAFETY PRECAUTIONS

  • Keep the adhesive container closed when not in use. The adhesive is highly flammable hence smoking and naked-flame must be avoided in the working area. Store the adhesive in a cool (<25°C) area . Proper ventilation must be provided on the shop-floor.

SHELF LIFE

  • At least one year from the date of manufacture in sealed condition if stored under recommended storage conditions.

DILUENT / CLEANER

  • Toluene may be used to clean the tools used for the application.

Products

Wood working adhesive