Surface to be bonded should be clean, dry and free from oil/grease stains.
Stir the adhesive before application.
Apply ROYAL BOND PU 2 on both the surfaces. Add 5 % hardener for better results.
Once the adhesive becomes dry, heat both the surfaces, press finally together.
Final bond is achieved in 24hrs.
Free from Benzene- Non-hazardous to health.
High coverage specially on flooring – 90 sq ft per liter depending upon the floor conditions.
Economical in long run.
Keep the adhesive container closed when not in use. The adhesive is highly flammable hence smoking and naked-flame must be avoided in the working area. Store the adhesive in a cool (<25°C ) area . Proper ventilation must be provided on the shop-floor.
At least one year from the date of manufacture in sealed condition if stored under recommended storage conditions.
DILUENT / CLEANER
Toluene may be used to clean the tools used for the application.